|
We have two ways for you to listen to the
hospital radio service at Heatherwood. Above most beds in the hospital
is a bedhead terminal provided by hospicom. A stereo selection of four
radio services is available including Radio Heatherwood.
If you are not able to use the terminal, a
personal radio with AM will allow you to tune in on 999kHz AM. (
Available in most areas of the hospital ). |
|
Terminal Above Your Bed
|
To use your terminal
above the bed you must first switch it on. A rocker type power switch is
located at the bottom right (underneath), as you look at the terminal.
Once switched on, it may take a few minutes before you see the front
screen image below. This is basically a computer which needs to
initialize before you can use it.
|
|
Terminal Front Screen
Click on any image to enlarge |
| Follow The
Easy Steps To Tune Your Terminal In:- |
|
 |
|
Step 1 |
On The Front Screen
A Number of Icons
Are In View, |
|
Touch The Icon Marked:- |
 |
Radio |
|
| |
|
|
Listen To Radio Screen |
|
Step 2
|
|
Touch The Icon Marked:-
|
|
Continue
|
 |
|
On Listen To Radio Screen.
|
|
 |
On the listen to
radio screen, it's informing you that a pair of headphones will be
required to listen to the radio. If you do not have a set plugged in
from below the screen, you will not be able to listen to any radio
services. Spare headsets are available from the nursing staff, Radio
Heatherwood or the terminal reps.
|
|
Available Radio Choices Screen |
Once you have
selected continue, it will launch into a new screen showing the four
radio services available. Be aware, sometimes it may not be required to
carry out step three, as once the page has loaded it will automatically
deliver Radio Heatherwood as your desired radio service.
|
|
 |
|
Step 3 |
|
Touch The Icon Marked:- |
|
Radio
Heatherwood |
 |
|
( Logo at top left hand ) |
|
Once Radio
Heatherwood has been selected the screen will display the following
picture and sound should be heard via your headphones:-
|
|
 |
| |
|
Adjusting The Volume |
|
Step 4
Adjust Volume Touching
- Or +
Icons at Bottom of Screen |
 |
If your volume is too
loud or too soft you can adjust the volume by carrying out step 4 above.
|
| |